Signals (Output Signals); Feedback Signals From Actuator - AUMA SAEx 07.2 Operation Instructions Manual

SAEx 07.2 SAEx 16.2 / SAREx 07.2
9.

Signals (output signals)

9.1.

Feedback signals from actuator

Information
Table 19:
Feedback signal
End position OPEN/CLOSED
reached
Intermediate position reached (op-
tion)
Torque OPEN/CLOSED reached
Motor protection tripped
Running indication (option)
Position feedback signal, (option)
Manual operation active (option)
SAREx 16.2
The switches can be provided as single switches (1 NC and 1 NO), as tandem
switches (2 NC and 2 NO) or as triple switches (3 NC and 3 NO). The precise version
is indicated in the terminal plan or on the order-related technical data sheet.
Type and designation in wiring diagram
Setting via limit switching
Switches: 1 NC and 1 NO (standard)
LSC Limit switch, closing, clockwise rotation
LSO Limit switch, opening, counterclockwise rotation
Setting via DUO limit switching
Switches: 1 NC and 1 NO (standard)
LSA DUO limit switch, clockwise rotation
LSB DUO limit switch, counterclockwise rotation
Setting via torque switching
Switches: 1 NC and 1 NO (standard)
TSC Torque switch, closing, clockwise rotation
TSO Torque switch, opening, counterclockwise rotation
Thermoswitches or PTC thermistors, depending on the version
F1, Th Thermoswitches
R3 PTC thermistors
Switches: 1 NC (standard)
S5, BL Blinker transmitter
Depending on version either with potentiometer or electronic position transmitter EWG/RWG
R2 Potentiometer
R2/2 Potentiometer in tandem arrangement (option)
B1/B2, EWG/RWG 3-wire or 4-wire system (0/4 20 mA)
B3/B4, EWG/RWG 2-wire system (4
Switches
20 mA)
Signals (output signals)
43