Motor Operation - AUMA SAEx 07.2 Operation Instructions Manual

SAEx 07.2 SAEx 16.2 / SAREx 07.2
7.2.

Motor operation

SAREx 16.2
Figure 39: Handwheel without/with overload protection
[1] Handwheel without overload protection (standard)
[2] Handwheel with overload protection/safety hub (option)
Valve damage due to incorrect setting!
Perform all commissioning settings and the test run prior to motor operation.
Actuator controls are required to operate an actuator during motor operation. If the
actuator is to be operated locally, additional local controls are required.
1. Switch on power supply.
2. To close the valve, switch on motor operation in direction CLOSE.
Valve shaft turns clockwise in direction CLOSE.
Operation
41