Spdif Signal Enable Switch (Sw8); Push Button Enable Switch (Sw9) - Analog Devices ADSP-21262 EZ-KIT Lite Manual

DIP Switch Settings

SPDIF Signal Enable Switch (SW8)

Push Button Enable Switch (SW9)

3-10
Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from
the device is a slave, the DSP must generate the frame sync and clock sig-
nals. By default, position 3 is "
control signals.
Position 4 of disconnects the AD1835A's
SW7
interface. This is useful when the DAI interface is to connect to another
device.
The SPDIF signal enable switch (
the CS8416 SPDIF receiver serial interface.
Table 3-3 shows which DSP signal is no longer being driven when the
corresponding switch position is placed in the "
Table 3-3. SW8 Connections
Switch Position DSP Pin
1
DAI_P2
2
DAI_P1
3
DAI_P4
4
DAI_P3
5
DAI_P15
6
DAI_P16
The push button enable switch (
the corresponding DSP pins. This allows the signals to be used for another
purpose. Table 3-4 shows the signal and
of the position of the
SW9
function as designed.
ADSP-21262 EZ-KIT Lite Evaluation System Manual
", and the AD1835A generates the
ON
ADC_DATA
) disconnects always driving signal of
SW8
OFF
SPDIF RX Pin
MCK
SDATA
FSYNC
SCK
SPI_CS
GPO0
) disconnects the push buttons from
SW9
connections. By default, all
SW9
switch are " ", allowing the push buttons to
ON
pin from the DAI
" position.