Example Programs - Analog Devices ADSP-21262 EZ-KIT Lite Manual

Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from
When the LEDs are accessed as
through the data on the DSP's pins
sary to set up the parallel port to be
as pins, set the
FLAG
rizes the LED and
FLAG
Table 2-3. LED Connections
LED Reference Designator
LED1
LED2
LED3
LED4
LED5
LED6
LED7
LED8
An example program is included in the EZ-KIT installation directory to
demonstrate the functionality of the LEDs and push buttons.

Example Programs

Example programs are provided with the ADSP-21262 EZ-KIT Lite to
demonstrate various capabilities of the evaluation board. These programs
are installed with the EZ-KIT Lite software and can be found in
\...\VisualDSP 3.5 32-Bit\212xx\EZ-KITs\ADSP-21262\Examples
refer to the readme file provided with each example for more information.
ADSP-21262 EZ-KIT Lite Evaluation System Manual
pins, the latch must be set up to pass
FLAG
. In this mode, it is also neces-
AD7–0
pins. To set up the parallel port
FLAG
bit in the
PPFLGS SYSCTL
connections.
DSP Pin Mapped as FLAG
AD0 FLAG8
AD1 FLAG9
AD2 FLAG10
AD3 FLAG11
AD4 FLAG12
AD5 FLAG13
AD6 FLAG14
AD7 FLAG15
Using EZ-KIT Lite
register. Table 2-3 summa-
. Please
2-7