Fujitsu BS2000 SE Series Operating Manual page 41

Additive Components
Power supply unit LED
LED state
Off (no light)
Steady green
Blinking green (with
power cord
connected)
Steady amber
Expansion module power LED
LED Status of hardware
state
Off (no Module is not powered on.
light)
Steady Module is on and functioning
green properly.
Steady Module is on and booting up.
amber
Fan tray LED
LED Status of hardware
state
Off (no Fan tray is not powered on.
light)
Steady Fan tray is on and
green functioning properly.
Steady Fan tray has nonfunctioning
amber fans.
Status of hardware
PSU is not powered on.
PSU is on and functioning properly.
External AC input parameters are within an
acceptable range but there is no DC output or it is
disabled.
PSU has no DC output.
Recommended action
No action required.
No action required.
No action required.
Recommended action
No action required.
No action required.
Replace fan tray.
Recommended action
Verify that the PSU power cord is
connected to a functioning power
source
No action required.
Replace the power supply.
Replace the power supply.
41