Fujitsu BS2000 SE Series Operating Manual page 15

Additive Components
Controls
Control Meaning
Identification (ID) button
ID
Lights up (blue) on the front and on the rear of the server when the ID button is pressed. The two ID
indicators are synchronized.
On/Off switch
When the Application Unit is switched off, it is switched on again by pressing the On/Off switch once.
When the Application Unit is in operation, it is switched off by pressing the On/Off switch once.
!
CAUTION!
Possible loss of data!
i
The On/Off switch does not disconnect the server from the voltage grid. To disconnect from
the mains completely, remove the power plugs. These buttons may only be used by
Customer Support.
RST or Reset button
RESET
Pressing the Reset button reboots the Application Unit.
! CAUTION!
Possible loss of data!
NMI button
NMI
!
CAUTION!
Do not press! Possible loss of data! The NMI button may only be used by Customer Support.
15