Fujitsu BS2000 SE Series Operating Manual page 39

Additive Components
Steady amber System is preparing to operate in high availability mode.
RDNT LED
LED state Status of hardware
Off (no light) System does not have redundant fans or PSUs installed
Steady System is operating in redundant mode.
green
Steady System has redundant fans and PSUs, but software has disabled
amber redundant mode.
Management port left (10/100 Mbps) status LED
LED state Status of hardware
Off (no light) Not cabled.
Steady amber No traffic being transmitted, but link is up.
Blinking amber There is traffic and packets are being transmitted or received.
Management port right (1000 Mbps) status LED
LED state Status of hardware
Off (no light) Not cabled.
Steady green No traffic being transmitted, but link is up.
Blinking green There is traffic and packets are being transmitted or received.
1/10 GbE SFP+ port LEDs
LED state Status of hardware
Off (no light) Not cabled.
Steady green Link is up in 10 GbE mode.
Blinking green There is 10 GbE traffic and packets are being transmitted or received.
Steady amber Link is up in 1 GbE mode.
Blinking amber There is 1 GbE traffic and packets are being transmitted or received.
No action required.
Recommended
action
No action required.
No action required.
No action required.
Recommended action
No action required.
No action required.
No action required.
Recommended action
No action required.
No action required.
No action required.
Recommended action
No action required.
No action required.
No action required.
No action required.
No action required.
39