Fujitsu BS2000 SE Series Operating Manual page 17

Additive Components
Global error indicator (yellow)
Lights up yellow when a prefailure event was detected which requires Customer Support to become
active (by way of precaution).
Flashes yellow when an error was detected which requires Customer Support to become active.
Does not light up when no critical event has occurred.
If the event is still acute after a power failure, the indicator is activated after the restart.
The indicator also lights up in standby mode.
You can obtain detailed information on the error cases displayed from the System Event Log (SEL),
on the ServerView Local Service Display, in the ServerView Operations Manager or on the web
interface of the iRMC.
Indicators on the operable drives/components
Optical drive activity indicator
Lights up green when the storage medium is accessed.
ServerView Local Service Display (AU47 M3 only)
A tray mechanism enables you to pull the ServerView Local Service Display out of the computer housing to read
information. Press the front of the module to release the lock.
You can also swing the ServerView Local Service Display out of its normal position at an angle of 120°. This makes
it easier to read the information when the server is located high up in the rack.
!
CAUTION!
If a fault occurs, please contact Customer Support.
17