Mailslots - Fujitsu BS2000 SE Series Operating Manual

Additive Components

4.2.4.4 Mailslots

Mailslots are used to import/export individual cartridges without interrupting library operation. The time-consuming
inventory of all the cartridges is consequently not required when a magazine is inserted. Always use the mailslot to
import/export cartridges.
Mailslots are always activated in BS2000 operation. Consequently 3 fewer slots are available for storing cartridges
in BS2000 operation. BS2000 can use 9 slots in the left-hand magazine and 12 slots in the right-hand one.
As soon as the mailslots are enabled, the three associated slots are no longer visible from BS2000, i.e. the /SHOW-
TAPE-STATUS <mn>,INFO=CARTRIDGE
not available to accommodate cartridges.
The tables below show the numbering of the slots (including the mailslots) when the cartridges or their labels are
viewed:
Mailslot 3: cleaning cartridge
(used for auto cleaning
Mailslot 2: I/E port (BS2000)
(drive 2 if present, otherwise unused)
Mailslot 1: I/E port (BS2000)
(drive 1)
Table 2: ETERNUS LT40 S2: Slot numbers of the left magazine with mailslots
Slot 21 Slot 20 Slot 19
Slot 17 Slot 16 Slot 15
Slot 13 Slot 12 Slot 11
Table 3: ETERNUS LT40 S2: Slot numbers of the right magazine
The command to open a mailslot may be denied if the robotics is busy with some operation. In that case "Busy" is
displayed. The command has to be repeated once the robotics operation is finished..
You move cartridges from a slot or a drive to a mailslot and vice versa via OCP using the menu
Media
.
command does not show these slots. These three slots are consequently
Slot 7 Slot 8 Slot 9
Slot 4 Slot 5 Slot 6
Slot 1 Slot 2 Slot 3
Slot 18
Slot 14
Slot 10
Commands > Move
69