Operating And Indicator Elements (Rear) - Fujitsu BS2000 SE Series Operating Manual

Additive Components

4.1.2 Operating and indicator elements (rear)

You can see the status LEDs of the SAS I/O module and the status LEDs of the power supply units on the rear side
of the ETERNUS JX40 (S2) subsystem.
Status LEDs of the SAS expander unit
Figure 28: Status LEDs on the rear of the device
The status LEDs of the SAS I/O module are located in the upper part of the device.
LED
UNIT ID LED
Identification status
SAS OUT LED / SAS IN LED
SAS ingoing/outgoing status
Status/Fault
LED Error status
Status LEDs of the power supply units
The status LEDs of the power supply units are located in the lower part of the devices (see
LED
Color Status Meaning
Blue Blinking Identification
Green On Link up
Yellow On Error detected, notify Customer Support
Green On Normal operation
Yellow On Error detected, notify Customer Support
Color Status Meaning
Green On Normal operation
figure 21 ).
50