Fujitsu BS2000 SE Series Operating Manual page 18

Additive Components
Hard disks
Figure 5: Indicators on a hot-plug HDD module
No. Meaning
1 HDD BUSY (green)
Lights up: HDD in active phase (drive active, access to drive)
Does not light up: HDD inactive
2 HDD FAULT (orange)
Does not light up: No HDD error
Lights up:
HDD Faulty or Rebuild Stopped (drive defective / needs replacing, a rebuild process was stopped or the
slide-in module is not correctly inserted)
Slow flashing: HDD Rebuild
(the data is being restored after changing a hard disk drive)
If a hard disk drive continuously indicates an error, the drive should be replaced by Customer Support as soon as
possible. In this case call Customer Support.
18