Reinigung / Autoklavieren; Cleaning / Autoclaving - BRAND micro Operating Manual

Pipette controller
Hide thumbs Also See for micro:
Table of Contents

Advertisement

Reinigung / Autoklavieren

Gerät gelegentlich mit einem feuchten Tuch ab-
wischen. Bei ordnungsgemäßer Handhabung ist
das Gerät wartungsfrei.
Hat Flüssigkeit das Saugsystem und den Saug-
schlauch kontaminiert, so müssen diese Teile sofort
gereinigt bzw. desinfiziert und ggf. erneuert werden.
( „Reparaturen durchführen", Seite 20).
Warnung!
Kontaminations- und Infektionsrisiko.
Schutzhandschuhe und Augenschutz tragen.
– Saugsystem aus dem Gerät herausnehmen und in
ein Reinigungs- oder Desinfektionsbad geben.
– Danach trocknen lassen.
– Ggf. das Gerät autoklavieren.
- 18 -

Cleaning / Autoclaving

Occasionally wipe the instrument with a damp cloth.
When properly used, the instrument is maintenance
free.
If liquid has contaminated the suction system, these
parts must immediately be cleaned or disinfected or,
if necessary, be replaced ( "Instructions for repair",
page 20).
Warning!
Risk of contamination and infection.
Wear protective gloves and eye protection.
– Remove the suction system and put all parts in a
cleansing or disinfecting bath.
– Then allow to dry completely.
– Autoclave the instrument, if necessary.

Advertisement

Table of Contents
loading

Table of Contents