Saugvolumen regulieren
Mikropipetten < – 5 µl
Stellrad in Richtung Abwurftaste
drehen, bis die Klemmbacken voll-
ständig geöffnet sind.
Mikropipetten > 5 µl bis 100 µl
Stellrad in Richtung Sichtfenster
drehen, bis die Klemmbacken den
Saugbalg auf etwa die Hälfte seines
Volumens zusammendrücken
(siehe Abb.).
Pipetten > 100 µl
Stellrad in Richtung Sichtfenster dre-
hen, bis leichter Widerstand spürbar
wird. Die Klemmbacken drücken den
Saugbalg vollständig zusammen.
Das Gerät ist nun einsatzbereit.
Adjusting the suction volume
Micropipettes < – 5 µl
Turn the thumb wheel towards the
ejector key until the clamping jaws
are completely open.
Micropipettes > 5 µl up to 100 µl
Turn the thumb wheel towards the
window until the clamping jaws com-
press the suction bellows to about
half of the volume (see figure).
Pipettes > 100 µl
Turn the thumb wheel towards the
window until a slight resistance can
be felt. The clamping jaws completely
compress the suction bellows.
The instrument is now ready for use.
- 11 -