Hinweis:
Das Gerät ist autoklavierbar bei 121 °C (2 bar)
und einer Haltezeit von mindestens 15 Minuten
nach DIN EN 285. Die Wirksamkeit des Auto-
klavierens ist vom Anwender jeweils selbst zu
prüfen.
– Gerät zusammenbauen
( „Reparaturen durchführen", Seite 20).
– Funktionsfähigkeit aller Bedienungselemente
überprüfen.
Lagerung
Gerät nur mit vollständig entspanntem Saugbalg
lagern ( „Saugbalg entspannen", Seite 17).
Note:
The instrument is autoclavable at 121 °C (250 °F),
2 bar absolute (30 psi) with a holding time of at
least 15 minutes according to DIN EN 285.
It is the user's responsibility to ensure effective
autoclaving.
– Reassemble the instrument
( "Instructions for repair", page 20).
– Check that all operating elements work properly.
Storing
When storing the instrument, the suction bellows
must be completely released ( "Releasing the suc-
tion bellows", page 17).
- 19 -