Brew Cycles & Fast Settings Subtab - Cafection Encore Ground Service & Installation Manual

6.5.4
To save any parameters changes, press on the "Exit" button
and accept modifications.
40
SERVICE & INSTALLATION MANUAL for Cafection's Encore Ground
Brew Cycles & Fast Settings Subtab
Brew Cycle Settings Interface
1. This table is used to set the brew cycles. Press on the quantity to modify it and enter
the desired number of units using the numeric keyboard.
2. This button is used to bring all brew cycles values back to factory settings.
3. This button is used to exit the brew cycles settings.
The Encore Ground has four (4) different brew cycles. The brew cycle is automatically
selected in accordance with the water quantity in the coffee-based recipe.
Cycle #1 (101 to 187 water units)
Standard brew cycle.
Cycle #2 (188 to 269 water units)
Three (3) stirring cycles where the total quantity of water is dispensed in three (3) shots. The
mix is stirred three (3) times, ensuring that the coffee completely comes into contact with
water. Ideal for recipes with high water and coffee volumes.
Cycle #3 (270 water units and more)
Double brew cycle. The machine splits the water and ingredients quantities in half to
perform two (2) separate brew cycles.
Cycle #4 (100 water units or less)
Quick brew cycle. Ideal for recipes with low water level.
Pause 1
First contact time between water and coffee grounds. To get more extraction, increase this
value. 20 units = 1 second.
Pause 2
Second contact time between water and coffee grounds. To get more extraction, increase
this value. 20 units = 1 second.
www.cafection.com
1
3
ENCORE GROUND Rev. 0 2017-04
800-561-6162
2