Structure; Gsd And Eds Files - Bosch IO-BOX32 Manual

2.3

Structure

2.4

GSD and EDS files

1070 072 302-101 (01.06) GB
The IO-BOX32 has a die-cast housing. The housing cover has two windows
through which the bus address as well as the status LEDs can be read.
All bus and supply cables are led in via metric screw cable fastenings and
connected to spring terminals.
The distribution of the 32 IO terminals as inputs and outputs can be chosen in
steps:
0 digital inputs and
D
8 digital inputs and
D
D 16 digital inputs and
D 24 digital inputs and
D 32 digital inputs and
To map the slave connections, the master uses description files:
D In the case of PROFIBUS-DP
D In the case of CANopen
The relevant file can be taken from CD-ROM "PLC-Tools" (Order number
1070 084 000) or downloaded from the Internet: http://www.bosch.de/at.
Alternatively, a floppy disk with all Bosch device master data can be ordered
(Order number, see section 9.2).
32 digital outputs
24 digital outputs
16 digital outputs
8 digital outputs
0 digital outputs
: device master data,
GSD file (German)
ESD file (English)
: Electronic Data Sheet,
EDS file
2–3