Scope Of Delivery; Using Safety Instructions; Structure Of The Safety Instructions; Explaining Signal Words And The Safety Alert Symbol - Bosch rexroth IndraControl XFE 01.1 Operating Manual

8 / 36

Explaining signal words and the safety alert symbol

2.2

Scope of delivery

•
Extension module
•
Bus base
•
24 V power connector XA-CN01
•
Safety instructions
3

Using safety instructions

3.1

Structure of the safety instructions

The safety instructions are structured as follows:
CAUTION
Do not open the batteries and do not heat them over 80 °C.
Fig. 3: Structure of the safety instructions
3.2 Explaining signal words and the safety alert symbol
The safety instructions in this documentation contain specific signal words (danger, warning, caution,
notice) and, if necessary, a safety alert symbol (according to ANSI Z535.6-2006).
The signal word draws attention to the safety instruction and indicates the risk potential.
The signal graphics (warning triangle with exclamation mark), added in front of the signal words
Danger, Warning and Caution refer to hazards to inidividuals.
DANGER
WARNING
CAUTION
NOTICE
Bosch Rexroth AG
Safety alert symbol
Signal word
Burns and chemical burns due to wrong
battery treatment!
In case of non-compliance with this safety instruction, death or serious injury
will occur.
In case of non-compliance with this safety instruction, death or serious injury
can occur.
In case of non-compliance with this safety instruction, minor or moderate
injury can occur.
In case of non-compliance with this safety instruction, material damage can
occur.
Consequences and
Avoiding danger
IndraControl XFE 01.1
source of danger
R911345570, Edition 06