Installation Position; Fastening The Product To The Adjoining Structure - Bosch Rexroth FMS Instructions Manual

R320103174/2018-08 | Function modules
6.4

Installation position

The product can generally be installed in any position.
Fig. 7: Securing the carriage
6.5

Fastening the product to the adjoining structure

NOTICE
Risk of loosening or warping of the product due to incorrect mounting!
Damage to the product.
Fasten the product using the recommended fastening elements.
f
Do not secure or support the product at the end plates.
f
Observe the tightening torques.
f
Observe the maximum permissible deflection f
f
If high system dynamics are required, supports (B) must be provided every 300 mm
When mounting to the frame, keep a minimum distance of 5 mm from the end plates.
X
A
B
f
max
Fig. 6: Minimum distance to the end plates / maximum permissible deflection
(please refer to the diagrams in the catalog)!
max
min. 5 mm
F
300 mm 300 mm 300 mm
Bosch Rexroth AG
!  Fig. 7.
300 mm
13/30