Use Of The Safety Instructions; Structure Of The Safety Instructions; Explaining Signal Words And Safety Alert Symbol - Bosch Rexroth IndraControl S20-PSDI-8/4 Application Description

DOK-CONTRL-S20*PSDI*8*-AP02-EN-P
IndraControl S20 Module With Safe Digital Inputs S20-PSDI-8/4
1

Use of the safety instructions

1.1

Structure of the safety instructions

1.2

Explaining signal words and safety alert symbol

DBR Automation is Bosch Rexroth Oficial Sales Partner. Interested in products or technical support? www.dbrautomation.com | +34951709474 | comercial@dbrautomation.com
The safety instructions are structured as follows:
Abb. 1-1 Structure of the safety instructions
The safety instructions in this documentation contain specific signal words (dan-
ger, warning, caution, notice) and, if necessary, a safety alert symbol (according
to ANSI Z535.6-2006).
The signal word is used to draw attention to the safety instruction and also provi-
des information on the severity of the hazard.
The safety alert symbol (a triangle with an exclamation point), which precedes the
signal words danger,warning and caution is used to alert the reader to personal in-
jury hazards.
DANGER
In case of non-compliance with this safety instruction, death or serious injury will
occur.
WARNING
In case of non-compliance with this safety instruction, death or serious injury can
occur.
CAUTION
In case of non-compliance with this safety instruction, minor or moderate injury can
occur.
NOTICE
In case of non-compliance with this safety instruction, material damage can occur.
Bosch Rexroth AG 5/102
Use of the safety instructions