Safety Instructions - Bosch IO-BOX32 Manual

1

Safety Instructions

1.1 Intended use
1070 072 302-101 (01.06) GB
Before you start working with the IO-BOX32, we recommend that you
thoroughly familiarize yourself with the contents of this manual. Keep this
manual in a place where it is always accessible to all users.
This instruction manual presents a comprehensive set of instructions and
information required for the standard operation of the described products.
The described products serve as decentralised input/output assemblies on
the CANopen bus and PROFIBUS-DP.
The products described hereunder
D were developed, manufactured, tested and documented in accordance
with the relevant safety standards. In standard operation, and provided
that the specifications and safety instructions relating to the project
phase, installation and correct operation of the product are followed,
there should arise no risk of danger to personnel or property.
D are certified to be in full compliance with the requirements of
D the EMC Directives (89/336/EEC, 93/68/EEC and 93/44/EEC)
D the Low-Voltage Directive (73/23/EEC)
D the harmonized standards EN 50081-2 and EN 50082-2
D are designed for operation in an industrial environment (Class A
emissions). The following restrictions apply:
D No direct connection to the public low-voltage power supply is
permitted.
D Connection to the medium and/or high-voltage system must be
provided via transformer.
The following applies for application within a personal residence, in
business areas, on retail premises or in a small-industry setting:
D Installation in a control cabinet or housing with high shield
attenuation.
D Cables that exit the screened area must be provided with filtering or
screening measures.
D The user will be required to obtain a single operating license issued by
the appropriate national authority or approval body.
.
This is a Class A device. In a residential area, this device may cause
radio interference. In such case, the user may be required to introduce
suitable countermeasures, and to bear the cost of the same.
Proper transport, handling and storage, placement and installation of the
product are indispensable prerequisites for its subsequent flawless service
and safe operation.
1–1