Table of Contents
Advertisement
© Panduit Corp.
2020
Tool Cavity Cover General Overview:
Table 2E: Tool Cavity Cover Overall Specification
2F: Table-Top Template
The Table-Top Template is used prior to PATMFM4.0 Fixture installation in order to prepare a selected
work surface for the Fixture. A perimeter pattern of eight (8) total through holes and an aligned rectangular
pocket must be drilled and routed respectively in order to install the PATMFM4.0 Fixture successfully. A
proper work surface can be made from a variety of materials, either homogenous or engineered and the
PATMFM4.0 Fixture includes the necessary hardware for installation onto hardwood-based surfaces.
Reference the Minimum Work Surface Requirements table below for the minimum work surface dimensions
required to successfully install the PATMFM4.0 Fixture.
OPERATION MANUAL
Dimension
Length
Width
Height
7.18" (182mm)
2.46" (62mm)
0.13" (3.3mm)
7
PATMFM4.0
ENGLISH
Value
Advertisement
Table of Contents
