Table of Contents
Advertisement
© Panduit Corp.
2020
Work Bundle Brought into Paddle, Initiating Cycle:
7. The actuation paddle is spring loaded and will continue to "self-reset" upon actuation for continued cycles.
Repeat work as required.
8. Once work has been completed, the paddle can be latched into the "storage" orientation by pressing on
the paddle until it is lying flat relative to the fixture. The spring-loaded latch will briefly retract and then
engage with the paddle, holding it in this position.
Setting Actuation Paddle into the Storage Position:
OPERATION MANUAL
ONCE ALIGNED BRING BOTH HANDS
FORWARD WHILE HOLDING THE CONDUCTOR(S).
ACTUATE THE PADDLE WITH THE RIGHT HAND.
ONCE PAST 15 DEGREES OF ROTATION,
THE PADDLE WILL INITIATE A TIE CYCLE.
28
SAMPLE CONDUCTOR
BUNDLE
TO STORE, PRESS ON PADDLE.
THE ACTUATION PADDLE
WILL ROTATE TO THE
DASHED POSITION
(STORAGE).
PATMFM4.0
ENGLISH
Advertisement
Table of Contents
