Table of Contents
Advertisement
© Panduit Corp.
2020
A. Front Upper Tool Support
B. Front Lower Tool Support
C. Rear Lower Tool Support
D. Retaining Thumbscrews
E. Tool Cage Airline
F. Tool Cage Retention Shoulder Screws
G. Actuation Trigger
H. Actuation Air Cylinder
Table 2B: Fixture Tool Cage Overall Specification
Length (Max-excluding airline)
2C: EI Communication Cable
The EI Communication Cable routes power and data between the PAT4.0 System and the PATMFM4.0
Fixture. This is a standard 25 Position D-Sub Male to Male connector cable that utilizes Philips head screws
on both connector ends for retention. The Cable delivers power to the PATMFM4.0 Fixture from the PAT4.0
System and relays cycle status and Actuation Paddle state back to the PAT4.0 System.
EI Communication Cable General Overview:
OPERATION MANUAL
Dimension
Width (Max)
Height (Max)
4.63" (118mm)
4.16" (106mm)
6.28" (160mm)
5
PATMFM4.0
ENGLISH
Value
Advertisement
Table of Contents
