Tip Deflector/Waste Receptacle - Panduit PATMFM4.0 Operation Manual

© Panduit Corp.
2020
9. When no Tool is present within the Tool Cage, the Tool Cavity Cover can be inserted into the space the
Tool would protrude through, covering the cavity and ensuring items do not fall through.
(Pressing down onto the divot located towards the back of the cover will pitch the front end upwards for
ease of removal.)
Tool Cavity Cover Installation and Removal:
6C: Tip Deflector/Waste Receptacle
The PATMFM4.0 Fixture includes a Tip Deflector. This Deflector diverts waste to an operator provided
receptacle placed underneath the Tool. The waste receptacle should be placed according to the diagram
below.
OPERATION MANUAL
29
PATMFM4.0
TOOL CAVITY COVER
INSTALL
TO REMOVE PRESS HERE ON THE
TOOL CAVITY
COVER.
THE COVER WILL PITCH UPWARDS,
ALLOWING FOR REMOVAL
ENGLISH