Table of Contents
Advertisement
© Panduit Corp.
2020
3B: Operational Safety Practices
1. DO NOT insert fingers in between the jaws of the tool.
2. DO NOT operate the tool with the rear jaw held open. Cable ties may be ejected from the tool at
high velocities.
3. DO NOT operate the tool near anyone's face.
4. DO NOT operate the tool without a wire bundle in the jaws.
5. DO NOT operate the tool with any object blocking the path of the cable tie around the jaws.
3C: Personal Safety
1. STAY ALERT, watch what you are doing and use common sense when operating a power
tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol
or medication.
A moment of inattention while operating power tools may result in serious personal injury.
OPERATION MANUAL
KEEP AWAY FROM LIVE CIRCUITS:
•
Operating personnel must use caution when opening covers.
•
Replacement of components and internal adjustments must be made by
qualified maintenance personnel.
•
Disconnect power cable when replacing components.
•
Dangerous voltages may exist even with the power cable removed.
•
To avoid injuries, always disconnect power and discharge circuits by
grounding before touching circuitry.
•
Input connection to the product must remain accessible as a disconnect
device.
•
DO NOT work on the product; connect or disconnect cables during periods
of lightning.
•
Provide wiring per national and local electrical codes.
WARNING
Use personal protective equipment. Always wear eye protection. Protective
equipment such as dust mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce personal injuries.
WARNING
Hearing protection is recommended to be worn during operation of tool.
11
PATMFM4.0
ENGLISH
Advertisement
Table of Contents
