Table of Contents
Advertisement
© Panduit Corp.
2020
Tool Cage aligned with Start of Fixture Track(s):
Tool Cage Properly Guided and Retained Within Fixture Tracks:
OPERATION MANUAL
TOOL CAGE SHOULDER SCREWS ALIGNED WITH START OF "TRACKS".
FOLLOW TRACK PATTERN
UNTIL REAR TRACK EDGES ARE REACHED.
REAR TRACK EDGE(S).
TOOL CAGE SHOULDER SCREWS PROPERLY
SEATED AT END OF FIXTURE TRACKS.
REPEAT THIS PROCESS IN THE REVERSE ORDER
TO REMOVE THE TOOL CAGE SUB-ASSEMBLY.
19
PATMFM4.0
ENGLISH
Advertisement
Table of Contents
