Table of Contents
Advertisement
© Panduit Corp.
2020
1: INTRODUCTION
The PATMFM4.0 Table-Top Bench Mount Tool Fixture allows an operator to apply cable ties onto a wiring
harness with minimal strain. The fixture requires an existing PAT4.0 Fully Automatic Cable Tie Installation
System and can utilize both the PAT1M4.0 and PAT1.5M4.0 Handheld Tie Installation Tools. The PAT4.0
Hand Tool is mounted in the PATMFM4.0 fixture such that the work can be brought to the tool and actuated
simultaneously. Follow the step-by-step instructions below to install and operate the PATMFM4.0 Fixture.
NOTE: In the interest of higher quality and value, Panduit products are continually
being improved and updated.
Consequently, pictures may vary from the enclosed product.
2: SYSTEM SPECIFICATIONS
The Panduit Corporation PATMFM4.0 Table-Top Bench Mount Fixture consists of seven individual units:
The Table-Top Fixture, Fixture Tool Cage, EI Communication Cable, Tip Deflector, Tool Cavity Cover,
Table-Top Template and the PATMFM4.0 Air Regulator.
NOTE: Any substitution may cause serious damage to the system and/or injury to the operator.
2A: PATMFM4.0 Table-Top Fixture
The PATMFM 4.0 Table-Top Fixture is electrically and pneumatically controlled via an existing PAT4.0
System. A concealed electrical enclosure (Item E) manages these connections via Item(s) G,H and I.
Reference scales (Item(s) D) allow an operator to reference the distance relative to the PAT1M4.0 and
PAT1.5M4.0 jaw centers from either direction. An Actuation Paddle (Item C) lays flat in its storage position
until released via the spring-loaded latch (Item B). This paddle once released and in its operational position,
is actuated by the operator to preform work.
PATMFM4.0 Fixture General Overview:
D
A. Work Surface
B. Paddle Latch
C. Actuation Paddle
D. Reference Scale(s)
E. Electronics Enclosure
OPERATION MANUAL
A
B
C
3
PATMFM4.0
E
F
G
H
I
ENGLISH
Advertisement
Table of Contents
