Table of Contents
Advertisement
© Panduit Corp.
2020
5F. Install Tip Deflector onto The PAT1M4.0/PAT1.5M4.0 Tool
1. Install the Tip Deflector onto the PAT1M4.0/PAT1.5M4.0 Tool. The installation process mirrors the
Tool's originally provided Tip Collector.
Tip Deflector Installation:
5G. Mount Tool Cage Assembly onto Fixture Assembly
1. The Tool Cage features 4 shoulder bolts that align and are retained by 4 corresponding "tracks" located
on the underside of the Fixture. Once aligned with the track openings, simply guide the Tool Cage
along the tracks until seated. A properly engaged Tool Cage will not shift or release from the Fixture
Assembly unless guided back and out of the tracks.
2. For aiding installation, releasing the Actuation Paddle (with the PAT4.0 switched off) will reveal a single
track located underneath the Paddle. This can assist in visually aligning and ensuring proper
engagement.
3. Route the Tool Cage airline to the Fixture Assembly's air output quick connector. This is a brass quick
connector featuring an orange quick-release ring. To insert, simply press the airline into the brass
feature until the airline bottoms out.
(To disengage the airline, simply press the orange ring into the connector whilst pulling the airline out
and away).
OPERATION MANUAL
ENGAGE TIP DIVERTER ONTO
TOOL AND SLIDE BACK (TOWARDS
HANDLE) TO LOCK.
17
PATMFM4.0
ENGLISH
PROPERLY MOUNTED
TIP DIVERTER ON
PAT1M4.0 TOOL.
Advertisement
Table of Contents
