© Panduit Corp.
2020
NOTE: Failure to align a waste receptacle correctly underneath the Tip Deflector can result in a safety
hazard with waste buildup on work floors. Assure the EI Communication Cable, the supply airline and the
PHM Feeder Hose do not obstruct the path between the Deflector and the receptacle.
Typical Waste Receptacle Orientation:
TYPICAL CONSUMER
WASTE RECEPTACLE.
7: MAINTENANCE
7A: Preventative Maintenance
Every 100,000 cycles
OPERATION MANUAL
CENTER WASTE RECEPTACLE
RELATIVE TO THE TOOL CAGE.
Interval
RECEPTACLE PLACEMENT.
(ACTUAL LOCATION MAY VARY
BASED ON SPECIFIC APPLICATION).
Maintenance Procedure
A. Remove the PAT1M4.0 or PAT1.5M4.0 Hand
Tool and clean debris (if any) from both the
Tool and the Tool Cage.
B. Check all threaded fasteners. Apply Loctite
242 as necessary and hand tighten.
C. Check the left and right reference scale
labels, replace if necessary.
30
PATMFM4.0
ENGLISH
TYPICAL WASTE