Table of Contents
Advertisement
© Panduit Corp.
2020
Table 2C: EI Communication Cable Overall Specification
2D: Tip Deflector
The Tip Deflector is similar to the Tip Collector originally provided with the PAT1M4.0 and PAT1.5M4.0
Handheld Tie Installation Tools. Instead of collecting the scrap produced, the Tip Deflector acts to divert
the waste under the work surface such that an appropriately located waste receptacle can be used under
said surface to collect scrap from multiple jobs/cycles without constant removal and clean up.
Tip Deflector General Overview:
Table 2D: Tip Deflector Overall Specification
2E: Tool Cavity Cover
The Tool Cavity Cover is utilized when work is NOT preformed and a PAT1M4.0 or PAT1.5M4.0 Tool is
NOT installed within the Fixture Tool Cage (The Tool Cage can remain mounted onto the PATMFM4.0
Fixture). The Cavity Cover installs into the cavity, located on the top side of the PATMFM4.0 Fixture, in
order to restore the work surface area lost. This Cover aids in reducing the chance of materials falling
through this tool "cavity" and can be easily removed to resume work.
OPERATION MANUAL
Length
2m (6.56 ft)
Dimension
Length
Width
Height
Width
2.17" (55mm)
0.65" (17mm)
6
Height
Value
3.58" (91mm)
2.09" (53mm)
2.25" (57mm)
PATMFM4.0
ENGLISH
Advertisement
Table of Contents
