Connection To Ac Power; Power Cord/Line Voltage Selection - Barco ImagePRO-SDI Installation Manual

Connection to AC Power

Power Cord/Line Voltage Selection

TM
ImagePRO is rated to operate with the following supplies:
Input Power:
Power Consumption :
TM
The ImagePRO Wide Screen Image Processor performs line voltage selection automatically. No user controls are
required for line voltage selection.
WARNING
AVERTISSEMENT
AVERTISSEMENT
16 Image
PRO – Multi Format Image Processor
100-240 VAC, 47-63 Hz
150 watts maximum
TM
When the ImagePRO is used with 230-volt supplies, a UL listed line cord rated for
250 volts at 15 amps must be used. This cord will be fitted with a tandem prong-type
plug.
Tandem Plug
La choix de la ligne de voltage se realize automatiquement par I'ImagePRO
Transformateur Graphique On n'apas besoin du controller usager pour la choix de la ligne
de voltage.
TM
Das ImagePRO -Gerät mu beim Anschlu an 240V ~ mit einer vom VDE auf
250V/10A geprüften Netzleitung mit einem Schukostecker ausgestattet sein.
TM
Manual # 26-0302000-00 / Revision E