Barco ImagePRO-SDI Installation Manual page 104

Effects Remote Commands
Command:
TRN type in
Description: Selects transition type when switching between inputs. Transition delay is only applicable if the
transition type selected is Fade to black / Fade to logo. Fade to logo transition type only available
on ImagePRO-SDI and ImagePRO-HD units, and is only selectable if Logo has been stored in non-
volatile memory.
Parameters: type – Transition type [0-2] 0= Fade to black, 1=Freeze image and Cut, 2= Fade to logo
in – Transition delay (in seconds) [1.0s - 5.0s]
Query:
TRN?
Returns the current transition type and transition delay in the format
= type in
Example: TRN 1 2.0 (Selects fade to black transition in 2 seconds.)
TRN? (Queries transition type and transition delay.)
90
ImagePRO – Multi Format Image Processor Manual # 26-0302000-00 / Revision E