Dvi-I Video In And Loop-Through Connectors (Universal Input 1-Imagepro-Hd™) - Barco ImagePRO-SDI Installation Manual

DVI-I Video In and Loop-Through Connectors (Universal Input 1-ImagePro-HD™)
Two DVI-I female connectors are located on the rear panel of the ImagePRO-HD™. One is used for Video input and
the other one is used for the buffered DVI-I Loop-Through. This Connector can be used with Analog inputs using the
DVI-I to HD-15 adaptor provided with ImagePRO-HD™.
14 Image
PRO – Multi Format Image Processor
Pin Function
1 T.M.D.S. Data2-
2 T.M.D.S. Data2+
3 T.M.D.S. Data2/4 Shield 15
4 T.M.D.S. Data4-
5 T.M.D.S. Data4+
6 DDC Clock
7 DDC Data
8 Analog Vertical Sync
9 T.M.D.S. Data1-
10 T.M.D.S. Data1+
11 T.M.D.S Data1/3 Shield 23
12 T.M.D.S. Data3-
MicroCross Pins
Pin
C1
C2
C3
C4
C5
DDC = Display Data Channel
T.M.D.S. = Transition Minimized Differential Signal
Pin Function
13 T.M.D.S. Data3+
14 +5V Power
ground (for +5V)
16 Hot Plug Detect
17 T.M.D.S. Data0-
18 T.M.D.S. Data0+
19 T.M.D.S. Data0/5 Shield
20 T.M.D.S. Data5-
21 T.M.D.S. Data5+
22 T.M.D.S. Clock Shield
T.M.D.S. Clock+
24 T.M.D.S. Clock-
Function
Analog Red Video
Analog Green Video
Analog Blue Video
Analog Horizontal Sync
Analog Common Ground Return
Legend
Manual # 26-0302000-00 / Revision E