Contrast And Brightness; Color Balance Submenu; Gamma; Aspect Ratio Submenu - Barco ImagePRO-SDI Installation Manual

raster box is intentionally "broken" to allow the user to view the input video behind it and align the input
video to the raster box precisely.

Contrast And Brightness

The adjustment range is 75.0% to 125.0%. 100% is the default setting for both contrast and brightness.
The Contrast and Brightness controls allow the operator to adjust the overall contrast and brightness of the image.

Color Balance Submenu

The menu entries depend on the current input type. For RGB input, the menu is:
The adjustment range is -25.0% to +25.0%. 0.0% is the default setting for both contrast and brightness.
Each of the contrast and brightness settings operates in conjunction with the global contrast and brightness settings,
above.
For Composite, S-video, YpbPr, or SDI input, the menu is:
The Hue value is measured in degrees, and the range is -180 to +180. Hue is n/a for YPbPr inputs.
The saturation value is in percentage, and for composite and S-Video inputs ranges from 0% to 150%, with 100%
being the nominal value. For YPbPr and SDI inputs, the range is 75.0% to 125.0%.
The Reset All item is a command that sets all values back to their defaults.

Gamma

This selection allows the user to specify the Gamma associated with the current input. The value range is 1.0 to 3.0,
in steps of 0.1. Default gamma values are stored with each video format.

Aspect Ratio Submenu

32
ImagePRO – Multi Format Image Processor
COLOR BALANCE
> Red Contrast
Red Bright
Grn Contrast
Grn Bright
Blue Contrast
Blue Bright
Reset All
COLOR BALANCE
> Hue
Saturation
Reset All
<val>
<val>
<val>
<val>
<val>
<val>
<val>
<val>
Manual # 26-0302000-00 / Revision E