Video Connection - Barco Nio 5MP Installation And User Manual

Connect the other end of the power cord to a grounded power
4.
outlet.
We recommend to use an additional surge protector between the
power supply unit and the power outlet to protect the equipment
against sudden power variations.

Video connection

Connecting DVI signals:
Connect one end of the DVI cable to the DVI input of the display.
1.
Connect the other end of the DVI cable to the DVI connector of the
2.
display controller board. If this board has 2 video heads (2 video
outputs), connect to Vid 1 (Head A).
Connecting DVI signals:
Connect the left display (when looking at the front side) to Vid 1 as
1.
described above.
Figure 12
Figure 13
One display:
Two displays:
Display installation
35