Barco Nio 5MP Installation And User Manual page 81

Click "Reboot" to disable DualView, click "Finish" and then click
9.
"Yes" to reboot your system.
When your system restarts, log in again using an account with
10.
administrator priveleges. DualView should now be disabled.
The "BarcoMed Product Installation Wizard" should automatically
11.
restart. Finish uninstalling the driver by clicking "Next" three
times. Then click "Reboot", "Finish" and "Yes".
If the "BarcoMed Product Installation Wizard" doesn't
automatically restart, finish uninstalling the driver by restarting
the "BarcoMed Product Installation Wizard" by browsing the
contents of your
"Setup.exe". Then follow Steps 3 through 7 on page 79 and
page 80 to finish uninstalling the driver.
Uninstalling the Barco NioWatch software
Prior to uninstalling the
Nio
off the Watch software follow these steps:
Right click on the
1.
34).
Click on "Exit" at the bottom of the
2.
Nio
Software CD and double clicking on the file:
Nio
Watch software you must turn it off. To turn
Nio
Watch icon in the Windows systray (figure
Figure 34
Figure 35
Troubleshooting
Nio
Watch menu (figure 35).
81