Barco Nio 5MP Installation And User Manual page 67

Precautions
• Take care not to damage or scratch the glass or LCD panel.
• Do not apply pressure on the glass or LCD panel.
• Do not apply or spray liquid directly to the glass, panel or
cabinet as excess liquid may cause damage to internal
electronics. Instead, apply the liquid to the cleaning cloth.
• DO NOT USE:
- Lye or cleaning solutions containing lye*
- Acid
- Detergents with fluoride
- Detergents with ammonia
- Detergents with abrasives
- Steel wool
- Sponge with abrasives
- Cloth with thread made of steel
- Other coarse tools
*(Lye is a strong caustic alkaline solution of potassium salts.)
Panel
Important:
We recommend to let this cleaning procedure be done in a Barco service
center. If not, you must perform the cleaning in a clean and dust-free
environment.
If there are dust particles on the LCD panel, blow them away by
1.
using a dust remover. E.g., DUST OFF 67 (KONTAKT Chemie).
A dust remover is composed of a blend of compressed liquid gases
functioning as propellant. They provide a jet of dry inert gas that
acts like compressed air for a quick and safe removal of dust
Cleaning
67