Display installation
Connect the output of the 12V DC power supply to the DC input of
2.
the display.
Connect one end of the proper power cable to the AC input of the
3.
12V DC power supply.
Connect the other end of the power cord to a grounded power
4.
outlet.
Video connection
Connecting DVI cables:
Connect one end of the DVI cable to the DVI input of the display.
1.
Connect the other end of the DVI cable to the DVI connector of the
2.
display controller board. If this board has 2 video heads (2 video
outputs), connect to output Vid 1 (Head A).
Connecting DVI cables:
Connect the left display (when looking at the front side) to display
1.
controller output Vid 1 (Head A) as described above.
Connect the second display to output Vid 2 (Head B).
2.
Nio MKII
One display:
(1)
Figure 15
Two displays:
41