Barco Nio 5MP Installation And User Manual page 77

Figure 29: The Windows Display Properties Control Panel Settings
Tab after the drivers have been installed and the resolution set
Note: The system shown in 29 above is a dual-head, single
Nio
BarcoMed Display Controller, with a 3rd party VGA controller
configuration. Your system may look different.
Reinstalling or Updating your BarcoMed Nio Driver
Caution: If you previously uninstalled the driver, do not allow Windows'
Plug and Play software reinstall the driver for you.
To reinstall or update only the BarcoMed
described in the section "Using the BarcoMed Product Installation
Wizard" with the following changes.
Boot your system, and log in using an account with administrator
1.
privileges.
Insert your
2.
"BarcoMed Product Installation Wizard" doesn't start within 3
with DualView Enabled.
Nio
Software CD into your computer's CD drive. If the
Troubleshooting
Nio
Driver, follow the steps
77