1. Manuals
  2. Brands
  3. Barco Manuals
  4. Monitor
  5. Nio 5MP
  6. System manual

Barco NIO 5MP System Manual

Hide thumbs Also See for NIO 5MP:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Installer and User Manual
System manual
Nio 5MP
Installation & User Manual

Advertisement

Table of Contents
loading

Related Manuals for Barco NIO 5MP

Summary of Contents for Barco NIO 5MP

  • Page 1 System manual Nio 5MP Installation & User Manual...
  • Page 2 February 2004 BarcoView Theodoor Sevenslaan 106 8500 Kortrijk, Belgium Phone: +32(0)56 23 32 44 Fax: +32(0)56 23 33 74 E-mail: sales.medical@barco.com BarcoView LLC 3059 Premiere Parkway Duluth, Georgia, 30097,USA Phone: +1 678 475 8000 Fax: +1 678 475 8100 E-mail: medical.us@barco.com Barco LTD 17th floor, Kuohwa Building, 868-6, Chungcheng Rd.

  • Page 3: Preface

    Preface System manual Nio 5MP...
  • Page 4 Preface (This page intentionally left blank.) (This page intentionally left blank.) System manual Nio 5MP...
  • Page 5 BarcoView software products are the property of BarcoView. They are distributed under copyright by Barco N.V. or BarcoView, LLC., for use only under the specific terms of a software license agreement between Barco N.V. or BarcoView LLC. and the licensee. No other use, duplication, or disclosure of a BarcoView software product, in any form, is authorized.
  • Page 6 Disposal Information The lamps inside the display contain mercury. Do not throw the display in the trash. Dispose of it as required by local ordinances or regulations. System manual Nio 5MP...

  • Page 7: Table Of Contents

    User options ............41 Installing the Nio Windows software....... 47 Operation ............57 Display Controller hardware tab ......59 NioWatch operation ..........64 Display operation..........68 Stand-by switching..........68 On-screen display ..........69 Locking and unlocking user controls....... 70 System manual Nio 5MP...
  • Page 8 Table of Contents Complete OSD overview ........72 Cleaning ............75 Troubleshooting ..........79 Technical Information ........95 Technical specifications......... 97 Connector pin assignments ........99 Glossary .............. 100 Warranty Statement ........103 System manual Nio 5MP...

  • Page 9: Safety Instructions

    Power connection • Power requirements: The apparatus must be powered using the 12 VDC power supply that is supplied with the apparatus. • The 12 VDC power supply must be powered by the AC mains voltage. System manual Nio 5MP...
  • Page 10 3 monitors. If you use an unstable cart or stand, the set may fall, causing serious injury to a child or adult, and serious damage to the equipment. More warnings in the Installation chapter. System manual Nio 5MP...
  • Page 11 Safety Instructions This apparatus conforms to: CE, IEC 60950, UL 60950, CAN/CSA C22.2 No. 950-95 (cUL) System manual Nio 5MP...

  • Page 12: Explanation Of Symbols

    Indicates the display is approved according to the c-UL regulations Indicates the display is approved according to the DEMKO regulations Indicates the USB connectors on the display Symbols used throughout the manual: Important notice or remark Warning or caution Hint, tip System manual Nio 5MP...

  • Page 13: Overview

    Overview System manual Nio 5MP...
  • Page 14 Overview (This page intentionally left blank.) (This page intentionally left blank.) System manual Nio 5MP...

  • Page 15: Introduction

    Introduction Introduction Thank you for choosing BARCO. Single display or complete system? This manual describes installation and usage of a complete Nio system. A Nio system is a bundling of one or more displays and one or more display controllers.
  • Page 16 Windows 2000 Service Pack 1 and above or Windows XP Features of the BarcoMed Nio display controller • Dual Head Configuration • 10 bit performance on LCD • 32MB Video Memory • Portrait or Landscape Mode • 256 Simultaneous shades of gray System manual Nio 5MP...
  • Page 17 For BarcoMed Nio 3MP •1536 x 2048 @ 60 HZ (primary) •2048 x 1536 @ 60 Hz For BarcoMed Nio 5MP •2048 x 2560 @ 60 HZ (primary) •2560 x 2048 @ 60 Hz For all BarcoMed Nio display controllers The following resolution is also available when the OS is booted in VGA mode.

  • Page 18: Package Contents

    European power cord • American power cord • Chinese power cord • This manual • Quick install card If some of the items are missing, please contact the reseller from whom you have purchased the unit. System manual Nio 5MP...

  • Page 19: Parts, Controls And Connectors

    The control wheel can be pushed like a push button and turned like a knob. It allows to put the display in stand-by, navigate through the on-screen display (OSD) menus and change values in the OSD. System manual Nio 5MP...
  • Page 20 5. USB upstream port Connect this connector to the PC USB bus if you wish to connect USB devices to the display’s USB downstream port. 6. DVI (digital) video input System manual Nio 5MP...
  • Page 21 & swivel mechanism during transport. After unpacking, you should remove this strap. Do not throw the strap away! Should the display have to be packed and shipped later, the strap must be applied to the foot again. System manual Nio 5MP...
  • Page 22 Parts, controls and connectors Display controller " Figure 3 1. Video 1 output 2. Video 2 output 3. VGA boot on/off jumper 4. PCI connector System manual Nio 5MP...

  • Page 23: Installation

    Installation System manual Nio 5MP...
  • Page 24 Installation (This page intentionally left blank.) (This page intentionally left blank.) System manual Nio 5MP...
  • Page 25 Place the display on a strong and stable table or desk. • Keep the display away from heat sources and provide enough ventilation around the display. • Do not scratch or apply pressure to the LCD panel. This may damage the panel permanently. System manual Nio 5MP...

  • Page 26: Display Controller Installation

    Figure 4: The BarcoMed Nio display controller Using the VGA capabilities of the BarcoMed Nio display controller Prior to installing the BarcoMed Nio controller, decide if you are going to use its on-board VGA capabilities. If you System manual Nio 5MP...
  • Page 27 32 bit or 64 bit slot with no loss of functionality. Figure 6 on page 28 illustrates the types of slots so that you can correctly identify which one to use for the BarcoMed Nio display controller and which ones not to use. System manual Nio 5MP...
  • Page 28 PCI slot, either 32 bit or 64 bit (see figure 6 above, for examples of slots). Be sure that the display controller is seated firmly in the slot. 5. Secure the card to the chassis with the PC’s I/O panel mounting screw, and replace the chassis cover. System manual Nio 5MP...
  • Page 29 This is due to the PC’s PCI bus control in the system BIOS, and not the BarcoMed display controller. It may become necessary, depending on how your PC’s BIOS configures the PCI bus, to switch your DVI display connections to achieve a linear desktop configuration. Figure 7 System manual Nio 5MP...

  • Page 30: Display Installation

    3. Keep the strap in case the display needs to be shipped later. Adjust the panel orientation You can change the orientation of the panel at any time, but it is more convenient to select landscape or portrait orientation before connecting the cables. System manual Nio 5MP...
  • Page 31 2. Very important: Tilt the panel before changing the orientation. Should you change the panel orientation without tilting it first, you might irreversibly damage the tilt & swivel mechanism. Figure 9 3. To change from portrait to landscape, turn the panel counterclockwise. System manual Nio 5MP...

  • Page 32: Power Connection

    1. To get access to the connectors, remove the connector compartment cover by pulling down the 2 clips at the top of the cover. 2. Connect the output of the 12V DC power supply to the DC input of the display. System manual Nio 5MP...
  • Page 33 4. Connect the other end of the power cord to a grounded power outlet. We recommend to use an additional surge protector between the power supply unit and the power outlet to protect the equipment against sudden power variations. System manual Nio 5MP...

  • Page 34: Video Connection

    Vid 1 (Head A). Connecting DVI signals: Two displays: 1. Connect the left display (when looking at the front side) to Vid 1 as described above. 2. Connect the second display to Vid 2 (Head B). System manual Nio 5MP...

  • Page 35: Usb Connection

    To use the USB hub: 1. Connect the display’s USB upstream connector to the USB port of the PC. 2. Connect any USB device to any of the display’s USB downstream connectors. System manual Nio 5MP...

  • Page 36: Cable Routing

    Bind the cables together above and under the foot, by means of the 2 velcro strips attached to the inside of the foot cover (packed inside the accessory box). • At last, put the foot cover back in place. System manual Nio 5MP...
  • Page 37 Figure 16 2. Slide the cover upward while moving the lower side of the cover towards the foot. 3. Press the cover to the foot so that it makes a clicking sound. System manual Nio 5MP...

  • Page 38: Attaching The Display To An Arm

    2. Remove the tilt & swivel foot cover. 3. Remove the small screw (A) fixing the small plastic cover on top of the foot. Next, remove the small cover itself. System manual Nio 5MP...
  • Page 39 5. Lift up the round plastic cover. 6. Remove the four screws fixing the foot while supporting the foot. 7. Attach the arm stand firmly to the panel using 4 screws M4 x 8 mm. 4 screws M4 x 8mm Figure 18 System manual Nio 5MP...

  • Page 40: Software Installation

    PC. Caution: Both displays connected to a single display controller must have the same physical orientation and resolution in order to be attached to the Windows desktop. This is a requirement of the Windows operating system. System manual Nio 5MP...

  • Page 41: User Options

    DualView is a feature that is automatically supported by Windows XP. However, BARCO has provided a means for you to enable this functionality while running Windows 2000. Figure 19 on page 42 and figure 20 on page 43 show the difference between the driver installed with DualView enabled or disabled.
  • Page 42 Software installation Figure 19: BarcoMed Nio-DualView Enabled, monitors 2 and 3 represent the two displays connected to a single BarcoMed Nio controller. System manual Nio 5MP...
  • Page 43 If you wish to enable DualView, you will need to reinstall the drivers with the “Enable the DualView device?” checkbox checked. Palette modes You can choose one of the three following Palette Modes: •User Modifiable System manual Nio 5MP...
  • Page 44 The colors setting for Barco grayscale displays should default to 256 colors (8 bits per pixel). The palette mode for the Barco grayscale displays should be set to “Static Gray palette mode with NO system colors”. This guarantees that...
  • Page 45 If you are unsure whether or not your application requires this “Static Gray Palette including Standard System Colors” mode, contact your application provider. Static Gray Palette with NO system colors This option sets the palette to be a static linear ramp of System manual Nio 5MP...
  • Page 46 DirectDraw or GDI. If you disable DirectDraw, your application will use GDI instead of DirectDraw. Please note that in any case, your application can always use BarcoMed driver functions (i.e. WinBarco) or other graphics extensions System manual Nio 5MP...

  • Page 47: Installing The Nio Windows Software

    4. Insert your Nio Software CD into your computer’s CD drive. If the “BarcoMed Product Installation Wizard” doesn’t start within 3 minutes, browse the contents of your Nio Software CD and double click on the file: “Setup.exe” to start the wizard. System manual Nio 5MP...
  • Page 48 If it determines that the Microsoft Installer is either out of date or missing, it will display the screen shown in figure 25 below. Click “OK” to continue, the wizard will then install a newer version of the Microsoft Installer. System manual Nio 5MP...
  • Page 49 If you do not want to install a particular BarcoMed Software product at this time, deselect it by clearing the checkbox next to 5. Click “Install” to continue or “Cancel” to exit the wizard. System manual Nio 5MP...
  • Page 50 “Finish” or “Cancel”. Select the device you want to install and then click “Next”. Caution: You can install the driver for only one type of BarcoMed device at a time. If you have multiple types of BarcoMed devices installed in your computer, System manual Nio 5MP...
  • Page 51 Caution: Once you click “Next”, you cannot cancel the driver installation. Prior to beginning the installation the BarcoMed Driver Install Wizard will warn you that while the driver is being installed your display may flicker. Click “OK” to continue. System manual Nio 5MP...
  • Page 52 9. When the screens shown in figure 28 below and figure 29 below appear, click “Yes” or “Continue Anyway” to continue. This screen may appear multiple times. Figure 28: Windows 2000 Digital Signature Not Found Warning Figure 29: Windows XP Windows Logo Testing Warning System manual Nio 5MP...
  • Page 53 Note: Clicking “Cancel” will also return you to the BarcoMed Product Install Wizard, but will not delete the Barco Display Driver. The wizard will also begin to install the next selected piece of BarcoMed Software. If the Wizard failed to successfully install the selected driver, it will warn you that the installation failed.
  • Page 54 “Reinstalling or Updating your BarcoMed Drivers” section found later in this chapter. BarcoMed Nio Watch installation 1. Click “Next” on the Welcome Screen of the BARCO NioWatch InstallShield Wizard (figure 31) to begin the installation or click “Cancel” to cancel and return to the BarcoMed Product Install Wizard.
  • Page 55 After your system restarts and you have logged in, Windows will install the Barco Monitor Plug-n-Play software. When Windows displays the screens shown in figures 32 and 33 below, click “Yes” or “Continue Anyway”...
  • Page 56 Software installation Figure 32: Windows 2000 Digital Signature Not Found Warning Figure 33: Windows XP Windows Logo Testing Warning System manual Nio 5MP...

  • Page 57: Operation

    Operation System manual Nio 5MP...
  • Page 58 Operation (This page intentionally left blank.) (This page intentionally left blank.) System manual Nio 5MP...

  • Page 59: Display Controller Hardware Tab

    Information PCI and Firm- 2MP2FH ware Information PCI and Firm- 3MP2FH ware Information PCI and Firm- 5MP1HM ware Information PCI and Firm- 5MP2 AURA ware Information PCI and Firm- 5MP2F ware Information PCI Information 2MP1 Only System manual Nio 5MP...
  • Page 60 2. Click on the “Settings” tab. Double click on the rectangle that represents one of the heads of the the BarcoMed Display Controller you are working with to bring up its properties page. Click on the “BarcoMed Hardware Tab” (see figure 34 on page 61). System manual Nio 5MP...
  • Page 61 Identify Device: This button is for BarcoView Medical Imaging Systems (MIS) internal use only and is grayed out. PCI Information Device ID: Displays the device’s PCI Device ID number. Vendor ID: Displays the device manufacturer’s PCI Ven- System manual Nio 5MP...
  • Page 62 For Windows XP and Windows 2000, this file will be saved on the c:\ drive and it will be named BarcoMedSystemReport.txt. The other report that is generated contains information about the Barco System manual Nio 5MP...
  • Page 63 BarcoMed Display Controller in order to update it’s firmware. This file will be provided by BarcoView MIS if and when a firmware update is required. Special Note: The BarcoMed Hardware Configuration Wizard is applicable only for AURA-based Display Controller(s). System manual Nio 5MP...

  • Page 64: Niowatch Operation

    Select the display you wish to control by selecting the corresponding display controller head from the Display drop-down box or by clicking on the corresponding icon. • Select the Display tab to view information about the display. System manual Nio 5MP...
  • Page 65 3. When done, click button Set point 1 of 20. 4. Repeat this procedure until the button is grayed. This indicates the last point is set. 5. Click OK to finish. System manual Nio 5MP...
  • Page 66 Via the user-friendly web interface, accessible from any client, users have access to all the information of the installed display base. For more information about MediCal Administrator, please contact BarcoView or consult our web site. System manual Nio 5MP...
  • Page 67 NioWatch operation Help • Here you can consult the NioWatch online help pages. System manual Nio 5MP...

  • Page 68: Display Operation

    The LED turns orange. Push and hold BARCO Figure 38 When the display is in stand-by, press control wheel to switch it back on. System manual Nio 5MP...

  • Page 69: On-Screen Display

    The adjustment name appears, as well as the current adjustment value. Turn the wheel to change the value. When done, click the wheel shortly to confirm the change and return to the menu. System manual Nio 5MP...

  • Page 70: Locking And Unlocking User Controls

    2. Turn the control wheel 1 step clockwise. 3. Click the control wheel 2 times. 4. Turn the control wheel 1 step counterclockwise. The on-screen display appears. Note: Steps 2 to 4 must be performed in maximum 3 seconds. System manual Nio 5MP...
  • Page 71 6. Click the control wheel to enter the Settings menu. SETTINGS DPMS Power LED User Controls EXIT 7. Turn the control wheel to select User Controls. 8. Click the control wheel to switch from “Off” to “On”. 9. Exit the menus and save the changes. System manual Nio 5MP...

  • Page 72: Complete Osd Overview

    The LED's orange DPMS state is not influenced by this setting. So, when the display goes into power-saving mode, the LED will turn orange, even if it was switched off by this setting. User Controls Disable the control wheel functions System manual Nio 5MP...
  • Page 73 Displays the current internal software version Display Lifetime Indicates the total time the display has been operating, including the time in stand-by Backlight Lifetime Indicates the total time the display has been operating, excluding the time in stand-by System manual Nio 5MP...
  • Page 74 Display operation (This page intentionally left blank.) System manual Nio 5MP...

  • Page 75: Cleaning

    Cleaning System manual Nio 5MP...
  • Page 76 Cleaning (This page intentionally left blank.) (This page intentionally left blank.) System manual Nio 5MP...
  • Page 77 A dust remover is composed of a blend of compressed liquid gases functioning as propellant. They provide a jet of dry inert gas that acts like compressed air for a quick and safe removal of dust System manual Nio 5MP...
  • Page 78 • Repeat with water only and wipe dry with a dry cloth. • The cabinet has been tested for resistance to the following products: Cidex, Betadine, Alcohol (Isopropyl and Ethyl), Ammonia-based cleaners (Windex) and Aquasonic Gel. System manual Nio 5MP...

  • Page 79: Troubleshooting

    Troubleshooting System manual Nio 5MP...
  • Page 80 Troubleshooting (This page intentionally left blank.) (This page intentionally left blank.) System manual Nio 5MP...
  • Page 81 If one display from a multi-head system exhibits problems, try to eliminate the problem by switching video cables or power supplies. In that way you can find out if the problem resides in the display or not. System manual Nio 5MP...
  • Page 82 PC or to the display • Display may need Phase and Frequency adjustments (if analog video is selected) Image contains missing • A number of missing pixels pixels may be normal (inherent in LCD technology) System manual Nio 5MP...
  • Page 83 The image is non-propor- • Select another resolution in tionally spread out over the Windows “Display the screen Properties” control panel • Switch the “Scaling” function (Geometry menu) in the display OSD to “None” or “Best Fit” System manual Nio 5MP...
  • Page 84 “640 x 480” pixels with 16 colors and a default refresh rate. If your BarcoMed Nio controller is not running VGA, the display may not be enabled yet. To enable the display, check the “Extend my Windows System manual Nio 5MP...
  • Page 85 4. For the display which is still attached click on the “Advanced” Button. 5. Select the “Adapter” tab and then click on the “List All Modes.” button. Select the resolution and refresh System manual Nio 5MP...
  • Page 86 Tip: After installing DualView and setting the resolutions in a Quad-Head Configuration you may need to drag the heads into the proper position in the window on the “Settings” tab, so that the arrangement in the window on System manual Nio 5MP...
  • Page 87 Caution: If you previously uninstalled the driver, do not allow Windows’ Plug and Play software reinstall the driver for you. To reinstall or update only the BarcoMed Nio Driver, follow the steps described in the section “Using the System manual Nio 5MP...
  • Page 88 40 below. Figure 40 3. To update the driver, clear the checkbox next to “NioWatch Setup” and click “Install”. 4. Please turn to Step 6 on page 50 and following the instructions in the section titled “Driver System manual Nio 5MP...
  • Page 89 Uninstalling the BarcoMed Nio driver or Barco NioWatch software To remove the BarcoMed Nio display controller driver and/or Barco NioWatch software from your system you must be logged in using an account with administrator privileges. Uninstalling the BarcoMed Nio driver 1.
  • Page 90 (figure 41). Click “Install” to continue. Figure 41 4. Click “Next”. 5. On the next screen (see figure 42 on page 91), check the checkbox next to “Uninstall this device” and click “Next” to continue. System manual Nio 5MP...
  • Page 91 “you must restart your computer before the new setting will take effect”. 8. If you have installed your driver in DualView mode the wizard will warn you that you must first disable DualView by rebooting and then run the uninstall program again. System manual Nio 5MP...
  • Page 92 “Setup.exe”. Then follow Steps 3 through 7 on page 90 and page 91 to finish uninstalling the driver. Uninstalling the Barco NioWatch software Prior to uninstalling the NioWatch software you must turn it off. To turn off the NioWatch software follow these steps: 1.
  • Page 93 Figure 45 3. Insert your BarcoMed Nio Software CD into your computer’s CD drive. 4. The BarcoMed Product Installation Wizard will display its welcome screen. Figure 46 5. Clear the checkbox next to the BarcoMed Driver. System manual Nio 5MP...
  • Page 94 Troubleshooting 6. Click “Install” to continue. 7. Click “OK”. 8. Click “Finish”. 9. Click “Finish” again. 10. Click “Yes” to restart your computer. System manual Nio 5MP...

  • Page 95: Technical Information

    Technical Information System manual Nio 5MP...
  • Page 96 Technical Information (This page intentionally left blank.) (This page intentionally left blank.) System manual Nio 5MP...

  • Page 97: Technical Specifications

    Sync: Complying to DVI Rev 1.0 specifications USB standard sup- USB 1.1 ported Power source Input for 12 VDC power supply unit: 90 ~ 264 VAC Input for display: 12 VDC. (The sup- plied 12VDC power supply must be used) System manual Nio 5MP...
  • Page 98 382 x 589 x 212 mm Net weight 11.1 kg Operating Tempera- 0°C to 40°C, 15°C to 35°C within ture specs Storage Temperature -20°C to 60°C Humidity 8% - 80% (non-condensing) for operation 5% - 95% (non-condensing) for stor- System manual Nio 5MP...

  • Page 99: Connector Pin Assignments

    TMDS DATA 4- TMDS DATA 0- TMDS DATA 4+ TMDS DATA 0+ DDC CLOCK DDC DATA TMDS DATA 5- TMDS DATA 5+ TMDS DATA 1- TMDS DATA 1+ TMDS CLOCK- TMDS CLOCK+ TMDS DATA 3- TMDS DATA 3+ System manual Nio 5MP...

  • Page 100: Glossary

    This is called a dual head imaging board. It is like two complete imaging boards implemented on one single unit. A dual head board in the computer behaves exactly as if two separate boards were installed. System manual Nio 5MP...
  • Page 101 Preset, the display uses default settings to display the image. When you make adjustments and save the changes, the current Preset is saved as programmable Preset. If this happens while all programmable Presets are occupied, the oldest programmable Preset is overwritten automatically. System manual Nio 5MP...
  • Page 102 Glossary (This page intentionally left blank.) System manual Nio 5MP...

  • Page 103: Warranty Statement

    Warranty Statement System manual Nio 5MP...
  • Page 104 Warranty Statement (This page intentionally left blank.) (This page intentionally left blank.) System manual Nio 5MP...
  • Page 105 The warranty period for the replacement parts will expire at the same moment as the original warranty period of the equipment. All parts replaced hereunder and returned to System manual Nio 5MP...
  • Page 106 2.6 Any specific services or procedures, asked for by Customer, related to verification of repaired equipment. System manual Nio 5MP...
  • Page 107 BarcoView. Any attempt to do so, voids the warranty. ARTICLE 5: DISCLAIMER OF WARRANTIES Barcoview disclaims all warranties, expressed or implied, including all implied warranties of merchantability and fitness for a particular purpose System manual Nio 5MP...
  • Page 108 ARTICLE 8: GENERAL 8.1 Customer acknowledges its understanding that all software and electronic devices, including BarcoView products are subject to possible error, mechanical or electrical failure, and should not be relied upon in System manual Nio 5MP...
  • Page 109 BarcoView shall not be responsible for machine failure and/or its failure to render service or maintenance due to causes beyond its reasonable control. System manual Nio 5MP...
  • Page 110 Warranty Statement (This page intentionally left blank.) System manual Nio 5MP...

Table of Contents