Display Controller Installation - Barco Nio 5MP Installation And User Manual
Barco nio 5mp: user guide
Hide thumbs
Also See for Nio 5MP:
- Brochure & specs (8 pages) ,
- System manual (110 pages) ,
- User manual (54 pages)
Table of Contents
Advertisement
Display Controller installation
Display Controller installation
Caution: Wear a protective ESD strap during installation or handling of
the display controller. Electrostatic charges can damage the display
controller.
Nio
Prior to installing your BarcoMed
display controller(s) in your PC
please take a few minutes to familiarize yourself with both the display
controller(s) and the PCI slots in your computer.
Nio
Figure 4: The BarcoMed
display controller
Using the VGA capabilities of the BarcoMed Nio display controller
Nio
Prior to installing the BarcoMed
controller, decide if you are going to
use its on-board VGA capabilities. If you are, check the setting of the
Jumper at J-1 on the graphics board (see figure 5 on page 29). By
default, VGA should be enabled, on the top two pins.
28
Advertisement
Table of Contents
