Video Connection - Barco Coronis 21-inch Installation & user manua Installation And User Manual

Video connection

Video connection
Connecting DVI cables:
Connect one end of the DVI cable to the DVI input of the display.
1.
Connect the other end of the DVI cable to the DVI connector of the
2.
display controller board. If this board has 2 video heads (2 video
outputs), connect to output Vid 1 (Head A).
Connecting DVI cables:
Connect the left display (when looking at the front side) to display
1.
controller output Vid 1 (Head A) as described above.
Connect the second display to output Vid 2 (Head B).
2.
One display:
(1)
Figure 15
Two displays:
45