16 ELECTRICAL SYSTEM
16.12
146
Checking the headlight setting
400726-10
Guideline
Fuse 1 - 10 A - power supply for control units and compo-
nents
Fuse 2 - 10 A - permanent positive for auxiliary equipment
(accessories circuit 1)
Fuse 3 - 10 A - tail light, license plate lighting
Fuse 4 - 10 A - light control unit
Fuse 5 - 10 A - engine control unit
Fuse 6 - 30 A - ABS return pump
Fuse 7 - 15 A - ABS hydraulic unit
Fuse 8 - 10 A - ignition positive for auxiliary equipment
(accessories circuit 2), USB power outlet
Fuse 9 -15 A - suspension control unit
–
Insert the spare fuse with the correct rating.
Fuse (58011109110) (
Fuse (58011109115) (
Fuse (58011109130) (
Tip
Insert a spare fuse so that it is available if needed.
–
Check the function of the electrical power consumer.
–
Close the fuse box cover.
Finishing work
–
Mount the front rider's seat. (
–
Mount the passenger seat. (
–
Park the vehicle on a horizontal surface in front of a light-
colored wall and make a mark at the height of the center of
the low beam headlight.
–
Make another mark at a distance
Guideline
B
Distance
–
Position the vehicle perpendicular to the wall at a distance
from the wall and switch on the low beam.
Guideline
A
Distance
–
The rider now mounts the motorcycle with luggage and passen-
ger if applicable.
–
Check the headlight setting.
The light-dark boundary must be exactly on the lower mark-
ing when the motorcycle is ready to be operated with the
rider mounted along with any luggage and a passenger if
applicable.
p. 169)
p. 169)
p. 169)
p. 97)
p. 97)
B
under the first marking.
5 cm (2 in)
5 m (16 ft)
A