19 SERVICE WORK ON THE ENGINE
19.3
156
E02278-11
Adding engine oil
Info
Too little engine oil or poor-quality engine oil results in premature wear to the engine.
The engine may be damaged if the engine oil level is too high.
–
Start the engine and check for leaks.
–
Switch off the engine.
–
Remove the filler plug with the O-ring and add the second par-
tial quantity up to the upper marking
level viewer.
Engine oil (2nd par-
tial quantity) approx.
Ambient
temperature: ≥ 0 °C
(≥ 32 °F)
Engine oil (2nd par-
tial quantity) approx.
Ambient
temperature: < 0 °C
(< 32 °F)
–
Mount the filler plug with the O-ring.
Danger
Danger of poisoning Exhaust gases are toxic and inhal-
ing them may result in unconsciousness and death.
–
Always make sure there is sufficient ventilation
when running the engine.
–
Use effective exhaust extraction when starting or
running the engine in an enclosed space.
–
Start the engine and check for leaks.
Finishing work
–
Check the engine oil level. (
–
Install the oil plug cover. (
–
Install the engine guard. (
Condition
The engine is at operating temperature.
Preparatory work
–
Stand the motorcycle upright on a horizontal surface.
–
Check the engine oil level. (
C
on the engine oil
0.60 l
Engine oil
(0.63 qt.)
(SAE 10W/50)
(
p. 178)
Engine oil (SAE
5W/40) (
p. 153)
p. 116)
p. 116)
p. 153)
p. 179)