Phone - KTM 1290 SUPER ADVENTURE S 2021 Owner's Manual

7.27.2

Phone

Condition
• The motorcycle is stationary.
• Bluetooth ® function is activated.
• The Bluetooth
to be paired.
–
Press the SET button or RIGHT button when the menu is closed.
–
Press the UP button or DOWN button until KTM MY RIDE is
marked. Press the SET or RIGHT button to open the menu.
–
Press the UP button or DOWN button until Phone is marked.
E02207-01
Press the SET button to open the menu.
Info
Only one cellphone can be paired with the vehicle.
–
Press the UP or DOWN button until Pairing is marked. Press
the SET button to open the submenu.
–
The vehicle starts searching for a suitable cellphone. If the
search was successful, the name of the cellphone is displayed
in the New Pairing submenu. Press the SET button to start the
pairing.
Info
The cellphone must be visible via Bluetooth
vehicle to find the cellphone.
–
A message appears on the dash indicating that the vehicle is
now ready for pairing. The pairing is completed successfully by
confirming the Passkey on the cellphone and on the dash.
Info
Press the UP or DOWN button until Delete Pairing is
marked. The paired device can be deleted by pressing
the SET button.
Not every cellphone is suitable for pairing with the vehi-
cle.
–
Move the previously paired device into the range of the vehicle
while the Bluetooth
The device is automatically connected with the vehicle.
If the device is not automatically connected with the vehi-
cle after approx. 30 seconds:
–
Switch on the vehicle again or repeat the New Pair-
ing procedure.
A suitable cellphone can be paired with the vehicle in the Phone
submenu.
® function should also be activated in the device
® function is active.
DASH 7
® for the
45