7.27.46 Shift Light RPM2
7.27.47 Clock & Date
7.27.48 Clock Format
Info
RPM1 can be set in intervals of between 5,000 and
10,000 rpm.
RPM1 must not be larger than RPM2.
If the engine speed reaches the set value RPM1, the
shift light flashes red.
Condition
•
The motorcycle is stationary.
–
Press the SET button or RIGHT button when the menu is closed.
–
Press the UP button or DOWN button until Settings is marked.
Press the SET or the RIGHT button to open the menu.
–
Press the UP button or DOWN button until Shift Light is marked.
–
Press the SET button to open the menu.
–
Press the UP button or DOWN button until RPM2 is marked.
–
Press the RIGHT or LEFT button to set the value for RPM2.
E02102-01
Info
RPM2 can be set in intervals of between 5,000 and
10,000 rpm.
RPM2 must not be smaller than RPM1.
If the engine speed does not reach the set value RPM2,
the entire display flashes red.
Condition
•
The motorcycle is stationary.
–
Press the SET button or RIGHT button when the menu is closed.
–
Press the UP button or DOWN button until Settings is marked.
Press the SET or the RIGHT button to open the menu.
–
Press the UP button or DOWN button until Clock & Date is
marked.
–
Press the SET button to open the menu.
Clock & Date allows the time, date and display formats to be set.
E02113-01
Condition
•
The motorcycle is stationary.
–
Press the SET button or RIGHT button when the menu is closed.
–
Press the UP button or DOWN button until Settings is marked.
Press the SET or the RIGHT button to open the menu.
–
Press the UP button or DOWN button until Clock & Date is
marked.
–
Press the SET button to open the menu.
–
Press the UP button or DOWN button until Clock Format is
E02112-01
marked.
–
Press the RIGHT or LEFT button to set the time format.
DASH 7
65