KTM 1290 SUPER ADVENTURE S 2021 Owner's Manual page 97

12.3 Suspension Mode
Info
The preload adjuster is only adjusted with the engine run-
ning.
The manual settings given are guidelines and depend on
the load.
High loads require a higher spring preload.
Low loads require less spring preload.
In automatic settings Low (optional), Standard (optional)
and High (optional) the spring preload is automatically
adjusted to the load detected by the system during the
journey.
In the Low (optional), Standard (optional) and High
(optional) automatic settings, it's possible that no
adjustment of the spring preload can be detected when
stationary.
The most recently selected rebound adjustment is shown on the
display.
Info
The symbol of the last setting flashes until the new setting
is adopted.
Possible states
Auto – Tuning of the suspension components is automatically
•
adjusted to the riding style of the rider
Sport – Tight tuning of the suspension components with very
•
direct feedback from the chassis
Street – Normal tuning of the suspension components with
•
direct feedback from the chassis
Comfort – Soft tuning of the suspension components with
•
good feedback from the chassis
Offroad – Tuning of the suspension components for use on
•
E02077-01
light offroad terrain (unpaved roads)
Advanced (optional) – The tuning of the suspension
•
components can be individually configured in the Fork menu
or Shock.
Various settings for the damping of the suspension components
can be selected in the Suspension Mode menu. The
settings Sport, Street, Comfort, Auto (optional), Offroad (optional)
and Advanced (optional) are available.
SUSPENSION SETTING 12
95