8 ERGONOMICS
72
–
Remove screws
the handlebar and lay it to one side.
Info
Cover the components to protect them against damage.
Do not bend the cables and lines.
–
Remove screws
–
Place the handlebar supports in the required position. Mount
308080-01
and tighten screws
Guideline
Screw, handle-
bar mount
Info
Position the left and right handlebar supports evenly.
–
Position the handlebar.
Info
Make sure the cables and wiring are positioned cor-
rectly.
–
Position the handlebar clamps. Mount and evenly tighten
1
screws
.
Guideline
E02242-10
Screw, handlebar
clamp
The markings
trally between the handlebar clamps.
Markings
Info
Make sure the gap widths are even.
1
. Remove the handlebar clamps. Remove
2
. Take off the handlebar supports.
2
.
M10x35
40 Nm (29.5 lbf ft)
M8x25
20 Nm (14.8 lbf ft)
A
of the handlebar scale are located cen-
B
face backwards.
Loctite
®
243™