Table of Contents
Advertisement
SFP+ specifications
General SFP+ specifications
The following table describes general SFP+ specifications.
Table 24: General SFP+ specifications
Parameter
Dimensions (H x W x D)
Connectors
Storage temperature
Operating temperature
SFP+ transceiver specifications
The following sections provide specifications for supported SFP+ transceivers:
•
10GBASE-SR/SW SFP+ specifications
•
10GBASE-LRM SFP+ specifications
•
10GBASE-LR/LW SFP+ specifications
•
10GBASE-ER/EW SFP+ specifications
•
10GBASE-CX specifications
•
10GBASE-ZR/ZW SFP+ specifications
10GBASE-SR/SW SFP+ specifications
The 10GBASE-SR/SR SFP+ provides 10 GbE service at 850 nm.
The following table lists the specifications for the 10GBASE-SR/SW SFP+. The part number of this
SFP+ is AA1403015-E6.
For more information about the 10GBASE-SR/SW SFP+, including test and measurement
information, see the IEEE 802.3ae standard.
Caution:
Risk of equipment damage
To prevent damage to the optical receiver, ensure that at least 1 dB of attenuation exists
between the transmit and receive ports.
August 2016
on page 58
Installing Transceivers and Optical Components on Avaya ERS 4800 Series
Comments on this document? infodev@avaya.com
Specifications
13.4 x 8.50 x 56.4 millimeters (mm)
0.53 x 0.33 x 2.22 inches (in.) unless otherwise
stated
LC ultra physical contact (UPC)
–40 to 85C
0 to 60C for RoHS -E5 models
– 5 to 85C for RoHS -E6 models
on page 52
on page 54
on page 56
on page 57
on page 58
52
Advertisement
Table of Contents
