Avaya 8800 Series Installation Manual page 85

Transmitter characteristics
Launch power
Minimum side mode suppression ratio
Minimum launch power in OMA minus
transmission and dispersion penalty (TDP)
Minimum optical modulation amplitude
Maximum average launch power of OFF
transmitter
Minimum extinction ratio
Maximum RIN
Maximum optical return loss tolerance
Receiver characteristics
Average receive power for BER 10
Maximum receive power for damage
Maximum receiver sensitivity in OMA
Maximum receiver reflectance
Stressed receiver sensitivity in OMA
Receive electrical 3 dB upper cutoff
frequency (maximum)
Examples of an OFF transmitter are as follows: no power supplied to the PDM, laser shutdown
for safety conditions, activation of a PMD_global_transmit_disable or other optional transmitter
shut down conditions.
10GBASE-CX specifications
The 10GBASE-CX is a 4-pair twinaxial copper cable that plugs into the SFP+ socket and
connects two 10 Gb ports. The reach for this cable is up to 15 m with a bit error rate (BER)
better than 10
CX is a lower cost alternative to the optical SFP+ devices.
For more information about the 10GBASE-CX, including test and measurement information
and more specifications, see the IEEE 802.3ak standard. The following table identifies the part
numbers for specific cable lengths.
Table 29: 10GBASE-CX cables
10 meter
3 meter
Installation — SFP, SFP+, XFP, and OADM Hardware Components
Parameter
OMA
12
-12
-12
. The signaling speed for each lane is 3.125 GBd ± 100 ppm. The 10GBASE-
Cable length
SFP+ transceiver specifications
Specifications
-– 4.7 to 4.0 dBm
30 dB
– 2.1 dBm
– 1.7 dBm
-– 30 dBm
3.0 dB
– 128 dB/Hz
– 21 dB
– 15.8 dBm to – 1.0 dBm
4.0 dBm
– 14.1 dBm
– 26 dB
– 11.3 dBm
12.3 GHz
Part number
AA1403018-E6
AA1403019-E6
August 2013 85